TECOMEC S.r.l. Strada della Mirandola, 11 – 42124 Reggio Emilia (RE) – Italy
Tel. +39.0522.959001 – Fax +39.0522.959060 – [email protected] – www.geoline.com
5
Pump Display
In Pump Display mode, the following is shown on the display:
•
Status of: Power supply, CAN, Unit of Measurement, Reserve, Presence of Calibration and RUN
status of the Pump.
•
The level of liquid in the tank in the measurement unit set
•
bar which gives a percentage indication of the filling level of the tank
The pump can be manually switched on/off by pressing OK
In Pump Display mode, press the
←
button to access the Operating Mode Selection menu, or press the
→
button to switch to Level Sensor Display mode.
Operating Mode Selection
In Operating Mode Selection it is possible to access the Level Sensor or Pump Display page, or the
Configuration page:
1. Level Sensor Display
2. Pump Display
3. Configuration
Configuration
Configuration mode allows you to modify the operational structure of the system once you have entered the
access password.
Access Password Entry:
←
→
moves between the 4 figures,
↑
increases the value of the selected figure,
↓
decreases the value of the selected figure, OK confirms the password entered.
