TECOM IP2092B Скачать руководство пользователя

Страница: 2 / 63

WEB IP PHONE - USER MANUAL

Environment

The phone you have purchased must not be disposed of with household waste. You should

return these to your distributor if they are to replace or dispose of them in an approved

recycling centre.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one or more of the following measures:



Reorient or relocate the receiving antenna.



Increase the separation between the equipment and receiver.



Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.



Consult the dealer or an experienced radio/TV technician for help.

CE Declaration of Conformity

This equipment complies with the requirements relating to electromagnetic compatibility,

EN55022 class B for ITE and EN 50082-1. This meets the essential protection

requirements of the European Council Directive 89/336/EEC on the approximation of the

laws of the Member States relating to electromagnetic compatibility.

Copyright Notice

stored in retrieval system or translated in to any language or computer language, in any

from or by any means, electronic, mechanical, magnetic, optical, chemical, manual or

otherwise, without the prior written permission of Company.

Company reserves the right to revise the publication and make changes from time to time in

the contents hereof without obligation of this company to notify person of such revision or

changes. The material contained herein is supplied without representation or warranty of

any kind. The Company therefore assumes no responsibility and shall have no liability of

any kind arising from the supply or use of this document or the material contained herein.

Trademarks

All trade names and trademarks are the properties of their respective companies.

Содержание IP2092B































































Результаты поиска

Содержание IP2092B

Отзывы:

Похожие инструкции для IP2092B

Бренды по названию

Популярные бренды

TECOM IP2092B, Руководство пользователя

Результаты поиска

Содержание IP2092B

Отзывы:

Похожие инструкции для IP2092B

Бренды по названию

Популярные бренды