Tecnoware UPS EVO DSP PLUS 1.0 MM, Руководство пользователя

Страница: 17 / 42

ENGLISH
UPS EVO DSP PLUS 13 User’s manual
8.5 Operation in Warning and Fault Status
WARNING Led
Short circuit LED5, LED6 on
Overload fault LED5 on, LED6 flashing
Bad battery LED5, LED7 on
Charger under voltage LED5 on, LED7 flashing
Charger over voltage LED5 on, LED7 flashing
Charger failure LED5 on, LED7 flashing
Inverter fault LED1, LED5 on
PFC fault LED1 flashing, LED2, LED5 on
DC/DC fault LED2, LED5 on
Over-temperature LED3 flashing, LED5 on
DC BUS over voltage LED2 flashing, LED5 on
Output over voltage LED1, LED5 on
Battery disconnected LED5, LED7 flashing
Low battery LED7 flashing
Overload warning LED6 flashing
Out of bypass range LED3, LED5 flashing
Other warning LED5 flashing
Warning Table
9 Communication Interfaces
The UPS is factory-equipped with USB Communication Interfaces . On the UPS rear side there are the connections
of the Interfaces.
To activate USB communication it is sufficient to connect the USB cable only.
The USB signals are all isolated through photo-couplers from the dangerous voltages that are present inside
the UPS.
Connecting to the Web site www.tecnoware.com, it is possible to download, free of charge, the update UPS
management Software, compatible with the most popular Operative Systems.