Tecnoware UPS EVO DSP PLUS 1.0 MM, Руководство пользователя

Страница: 12 / 42

ENGLISH
User’s manual 8 UPS EVO DSP PLUS
5.1.2 Buttons
Functions of the buttons are given below:
Button Function
ON/OFF
Turn ON the UPS : press and hold ON/OFF. If UPS is off, all led will flash few second, then the
UPS will turned ON.
Turn OFF the UPS : press and hold ON/OFF. If the UPS in on, it will go off or go standby charging
if the utility is available
5.1.3 Acoustic Alarm
UPS status Acoustic Alarm
Battery Mode Beeping once every 4 seconds
Low Battery Beeping once every second
Overload Beeping twice every second
Fault Mode Beeping continuously
5.2 Rear Side
Figure 4 – Rear Side
1. Computer Interface (USB connector ) : it is the communication USB port.
2. Grounded AC Input power cord: to connect the UPS to the AC utility line.
3. Input Circuit Breaker: it goes off in Overload or short-circuit condition; push the external button of the
Circuit Breaker to reactivate it.
4. Grounded Output Receptacles: IEC C13 type; to supply critical loads.
EVO DSP PLUS 1.0 MM
2
13
3
13
13
1
4
13