Tecnoware EVO DSP MM 10.0, Руководство пользователя

Страница: 6 / 64

ENGLISH
User’s manual 2 UPS EVO DSP MM RM
1 Introduction
UPS EVO DSP MM RM (UPS means Uninterruptible Power Supply) is the result of constant technological research
aimed at obtaining the best performance at the lowest cost.
UPS EVO DSP MM RM is an advanced ON-LINE UPS built specifically to protect your computer from any irregularities
in the AC line (for example blackouts, brownouts, over voltages, micro-interruptions) which often cause damage to
hardware and software.
All that is possible because UPS EVO DSP RM is a Double-Conversion ON-LINE UPS.
Under normal AC line condition UPS EVO DSP MM RM provides an automatic Output Voltage regulation from the
Rectifier and Inverter blocks and filters out frequently occurring electrical disturbances (high Voltage transients,
spikes, interferences, etc.), thus protecting the devices connected to its outlets. During a power failure, UPS EVO
DSP MM RM continues supplying adequate AC power (with a true sine wave) to all connected devices through its
internal batteries and by its DC/AC converter (Inverter).
UPS EVO DSP MM RM protects the devices from accidental overload or Inverter fault by an Automatic Bypass that
directly connects the AC Input line with its outlets.
The EVO DSP MM RM models are factory-equipped with RS-232 and USB interfaces, which may be used for notify to
a computer a power failure or a Low Battery condition: this allows automatic data backup during an extended
blackout with the most common operating systems (Windows, Linux, Unix, etc). Thanks to Interfaces, UPS DSP MM
RM can communicate the several made measurements (Input/Output Voltage, batteries, absorption, Frequency,
etc.), and can also be programmed in order to start-up or shutdown automatically at fixed times.
This manual is a guide that enables you to correctly install and use your UPS. This
manual includes important SAFETY instructions for the operator, for the UPS correct
installation, and gives useful advice on the product and battery maintenance. For any
type of problem, please refer to this manual before calling the customer service.
EVO DSP MM RM is constantly being developed and improved: consequently, your unit may differ somewhat from
the description contained in this manual.
This manual includes the following models:
•
EVO DSP MM 6.0 RM (6 KVA)
•
EVO DSP MM 10.0 RM (10 KVA)
In this manual EVO DSP MM RM will simply be referred to as UPS.
EVO DSP MM RM models are made of 2 separate units: the UPS unit (containing the control and power electronics)
and the Battery Box unit containing the batteries and batteries charger. The 2 units must be connected together
as explained into chapter 6 “Electrical Installation”
All models can be placed in 19” rack cabinets. Optional accessory kits are available for the installation in rack
cabinets.
Each unit (UPS unit or Battery Box unit) has a 3U height (1U is equal to 1 Rack unity, about 44,5 millimetres).