TECNOVAP Steam Box Professional, Руководство пользователя

Страница: 23 / 37

STEAM BOX PROFESSIONAL
Pag . 23 TECNOVAP 06/19
To use this accessory, follow the brush assembly instructions provided above.
Once cleaning has been completed, it is advisable to suck up around 3-5 litres of clean water to clean out
the inside of the hose (36) and the suction conduits. Clean and dry all the accessories used. Lift the
suction unit bin (18), empty and rinse and then leave to dry before repositioning.
8.2. USING STEAM BOX PROFESSIONAL WITH JULY KIT
(only for models 10,8 kW and 14,4 kW)
Warning!!
Switch off the steam generator before connecting the steam hose.
Insert the steam plug (37) in steam socket (9) on the machine and turn the closing lever.
Switch on the main switch (4) and buttons and wait until the light comes on, indicating
that there is steam in the boiler.
Select the required quantity of steam delivery using the button (31) on the grip (whenever the machine is
switched on the steam selector is always disabled, the LEDs on the steam grip flash alternately to indicate
that the required delivery level must be selected); one of the LEDs (31A, 31B or 31C) comes on steady to
indicate the set value. (1=minimum 2=medium 3=maximum), press the button (30) to deliver the steam.
Use the lever (30A) to lock the steam delivery button (30).
Button (34) allows you to add detergent to the steam and must be run at intervals of a few seconds to
avoid excessive detergent injection. For overheated water delivery, adhere to the operating mode
described above, activating button (33).
Both the detergent and the overheated water function must be run at intervals (e.g. 20 seconds on 20
seconds off), neither function is intended for continuous run.
The detergent and/or overheated water are delivered only if the steam outlet is active and the “steam
presence” LED is on.
Warning!!
The button (33) releases from the lance the overheated water under pressure at a temperature
which, depending on the model, can reach 180°C, be very careful not to press this accidentally and
make sure that the jet never points at persons or animals.
For steam cleaning combined with injection of detergent and/or overheated water, select and install the
most suitable accessory after having first switched off the machine:
Fit the steam lance (71) on the extension tubes (if necessary), locking it in place using the quick-fit
connector (75). Finally, tighten the fastening knob (41). To release the accessory and/or extension tubes,
unscrew the knob (41), press and hold the quick-fit connector (75).