INSTALLATION AND SETUP
1. To mount the ventilation unit, prepare a round through-
hole in the wall depending in the "Pico HP2 model" you
have purchased, having a 1° inclination downwards
towards the outside.
The size of the hole is shown in the figure below.
WARNING!
THE VENTILATION UNIT MUST NOT BE INSTALLED WHERE
THE AIR DUCT CAN BE BLOCKED BY SHUTTERS, BLINDS, ETC.
TO PREVENT DUST DEPOSITING AND ACCUMULATING. ALSO
CURTAINS MAY BLOCK THE NORMAL FLOW OF AIR IN THE
ROOM, MAKING THE UNIT'S OPERATION INEFFECTIVE.
8
ø 100 - 125-150 mm
WARNING!
DO NOT INSTALL THE UNIT ABOVE DELICATE FURNITURE OR PICTURES/PAINTINGS.
DO NOT PLACE THE DEVICE ABOVE OR NEAR THERMOSTATS
.