background image

27

The unit should be stored in its original packaging in a ventilated area at a temperature of +10°C to 

+40 ° C.

   

The air must not contain any aggressive vapours or chemical mixtures that can corrode, or compromise 

the integrity of, the connections. 

For handling, only use suitable lifting equipment to prevent damage to the unit (dropping or excessive 

swing). Follow the applicable regulations regarding transport, according to the type of load.

The units can be transported by any means as long as adequate protection is provided against weather 

and mechanical damage. Avoid bumps and collisions during transport and handling operations.

TRANSPORTATION AND STORAGE

WARRANTY

The warranty lasts for two (2) years from the date of delivery, and covers material defects with the exception of 

goods not manufactured by the supplier. The warranty does not apply to defects caused by:

• unsuitable transport;

• the negligent or improper use of the product, or any use thereof that fails to  comply with the instructions and/

or manuals of installation, use and maintenance;

• non-observance of the product’s technical specifications

• repairs or modifications carried out by the client or by third parties without the supplier’s prior written 

authorization

• lack of, or unsuitability of, maintenance

• anything else not relating to original material or manufacturing defects.

• provided that the customer's complaint is covered by the warranty and notified in the terms and conditions 

requested by the supplier, the latter will, at its discretion, replace or repair each product or parts thereof that 

present flaws or e or repair each faulty product or part/s thereof 

• the warranty does not cover damage and/or defects of products arising from anomalies caused by, or related to, 

parts that have been assembled/added directly by the customer or by the end consumer.

At the end of its life, the product must not be disposed of together with normal domestic waste. It may be disposed 

of by delivering 

it to an appropriate state-run recycling centre or to an approved private service 

provider. To underline the duty to properly dispose of household appliances, the product indicates the symbol of the 

mobile waste bin as crossed (not to be used to dispose of the product).

DISPOSAL

27

Содержание PICO HP2 Series




























Отзывы: