OPERATION OF THE PICO HP2
CONSTRUCTION DETAIL
The ventilation unit consists of a fixed-length circular air duct, a ventilation unit, and an outdoor grill.
The two motors, two filters and the exchanger are located within the inner duct.
The filters are designed to purify the intake air and prevent the entry of objects foreign to the exchanger
and fans.
The ventilation unit generates an audible alarm to remind you to clean or replace the filter every 1,500
hours of operation.
The ceramic heat exchanger uses the heat energy in the extracted air to heat the incoming air flow.
The exchanger is equipped with a pull-cord inside to facilitate its extraction from the ventilator. The
heat exchanger is installed on an insulating material, used also as a sealant.
The ventilation unit must be installed on the inner side of the wall.
The outside grill must be installed on the wall exterior, to prevent water and other objects from
entering the ventilation unit.
DETAIL OF EXCHANGE BOX
IN CERAMIC MATERIAL
FANS BODY
EXTERNAL
GRID
LED FUNCTION
SET
DESIGN AIR INTAKE
WITH QUICK-RELEASE FOR
MAINTENANCE
EXTRA-SLIM
INTERNAL GRID
THREE-SPEED
MOTORS
FILTERS
6