IU_ AuditLine_00_Eng 4
LOCK FEATURES
Codes
•
One Manager: can open, changes his code, manage users, program time delay, audit users
and lock.
•
Users: can open and change their own codes.
New codes are rejected when less than 2 digits are different from existing codes.
Dallas i-Button
A Dallas key can be associated to any user during user installation (function #1) by simply
entering a Dallas key after the code has been entered. User will be identified by combination plus
Dallas key. Multiple keys with the same ID can be programmed (through PC software) and can
be supplied for special applications.
Time Delay
Time delay programmable from 0 (no time delay) to 99 minutes. Open window from 1 to 19
minutes.
During time delay enabled LED flashes at two seconds intervals. Open window is indicated by
LED then buzzer at 1 seconds intervals alternately (once LED, once beep).
Battery low warning
If battery low (<6V) during motor activation, multiple beeps.
Time penalty
When entering code, a time penalty of 5 minutes will be started after the 4
th
consecutive wrong
code entered. During time penalty, LED flashes at 10s interval, no access possible to lock.
Any key pressed during time penalty emits a long beep.
After time penalty, two consecutive wrong codes will start it again.
Audit features
Users current status can be audited through the keypad with function #7.
A «basic audit» file (last 100 openings, no time&date) is recorded on the standard lock board.
“Basic audit” can be downloaded to an i-Button on the keypad with function #7
Additional features
•
TD override user #9 – When TD active, user #9 always override TD in “dual mode”.
•
Basic Input/Output features – If standard I/O is activated, silent alarm (+1 on combination
last digit will trigger an alarm output signal) and disable input features are active through
additional 4-wires on-board connector.
