IU_ AuditLine_00_Eng 6
Enter new code. Double beep if allowed, long beep if not valid.
If allowed, enter new code again to confirm.
Double beep if correct, long beep if confirmation error.
•
If a Dallas key is associated to the user combination, the same or a new key has to be
entered when entering the new code and when confirming it.
•
A Dallas key can be associated to the Manager code during this procedure. Once a key is
associated to the Manager, Manager will always require a key together with the code.
To activate users
(special function #1)
Enter special function #1.
Enter Manager code.
Enter user ID (1 – 9). Double beep and LED power-off if user is already active, exit function.
Long beep if user is not available, aborting function. Double beep if user is not active (“deleted”).
Enter new user code. Double beep if correct, long beep if code error, aborting function.
Enter again code to confirm. Double beep if correct, long beep if confirmation error.
Notes:
•
You can associate a Dallas key to the user code during this procedure.
•
If Manager is the only installed code or dual mode is active and only one user is installed, this
function is not available.
•
If only one user is installed, it is not necessary to enter user ID
•
Manager can activate user #9 only if no time delay or during open window.
•
If dual combo mode enabled, Manager combo has to be entered after a user valid combo.
To disable/enable users (bulk)
(special function #2)
Enter special function #2.
Enter Manager code.
Double beep: active users are disabled (or disabled users are enabled “activated”).
Notes:
•
This function is available only if more than one user is installed and dual mode is not active.
To delete users
(special function #3)
Enter special function #3.
Enter Manager code.
Enter user ID (1 - 9).
Double beep if user is installed: user is now “deleted”.
Long beep if user is not available, aborting function.
Notes:
•
If Manager is the only installed code or dual mode is active and only one user is installed, this
function is not available.
•
If only one user is installed, it is not necessary to enter user ID.
•
If dual combo mode enabled, Manager combo has to be entered after a user valid combo.
