IU_ AuditLine_00_Eng 5
GENERAL PROCEDURES
To enter Manager or user code
Enter code. Double beep if valid, long beep if wrong code.
•
If a Dallas key is associated to the user (or to the Manager) code, plug the key into the key
reader slot after the code has been entered. Double beep if valid, long beep if error. If no key
is entered within 7 seconds after combination, the lock will signal a long beep (wrong-try).
To enter special function (Manager or user)
Hold down function number until double beep. Enter Manager or user code. Double beep if valid,
long beep if not.
•
If a Dallas key is associated to the user (or to the Manager) code, plug the key into the key
reader slot after the code has been entered. Double beep if valid, long beep if error. If no key
is entered within 7 seconds after the combination, the lock will signal a long beep (wrong-try).
To open (Standard mode)
Enter Manager or user code (and key if necessary).
If time delay enabled, LED flashes at two seconds intervals. Open window is indicated by LED
flashing at 2 seconds intervals and beep at 2s intervals alternatively (once beep and once LED).
Wait open window.
Enter combo again.
Motor is activated.
To open (Dual combo mode)
Enter first combo (and key if necessary).
Enter second combo (and key if necessary).
If time delay feature is installed, first combo will start time delay. During open window, enter
both combos to open.
Motor is activated.
To open (Override mode – user #9)
Enter first combo (and key if necessary). Time delay will start counting.
Enter user #9 combo (and key if necessary) to open.
Motor is activated.
USERS INSTRUCTIONS
To change code
(special function #0)
Enter special function #0.
Enter actual code.
