36
Instruction and maintenance manual
ENGLISH
2
TRANSPORTATION AND
HANDLING
The.unit.is.shipped.in.a.cardboard.box,.covered.with.
a.plastic.sheet.and.enveloped.by.polyurethane.foam.
to.protect.it.from.damage.in.the.event.of.impacts.or.
accidents.
2.1 Receipt
All. units. are. carefully. inspected. before. shipping..
Upon. receipt,. customers. should. verify. that. the.
packaging. and. the. material. inside. it. has. not.
been. damaged. (unless. otherwise. instructed. by.
TECNOMAGNETE.S.p.A.).in.order.to.ensure.that.the.
unit.has.not.been.damaged.during.transport.and.that.
the.material.supplied.complies.with.order.specifica-
tions..Visible.transport.damages.should.be.immedi-
ately.reported.to.TECNOMAGNETE.S.p.A..and.the.
forwarding.agent.
ATTENTION
All.damages.and.anomalies.must.be.reported.within.
ten.days.from.receiving.the.goods.
2.2 Handling
Weight.of.model.ST100:.0,4.kg.
Weight.of.model.ST200:.2,0.kg.
Always keep the original packaging so that it can
be used to transport the unit if needed.
2.3 Transportation
The.unit.should.always.be.transported.within.the.fol-
lowing. environmental. limits:. temperature. ranging.
from.–10°C.to.+55°C,.with.temperature.increase.up.
to.70°C.for.a.maximum.of.24.hours.
If.the.unit.requires.the.use.of.specific.transportation.
means.(by.sea.or.air),.special.provisions.shall.have.to.
be. adopted. in. order. to. protect. it. from. damages.
caused. by. potential. impacts.. The. box. should. also.
contain. hygroscopic. salts. to. protect. the. unit. from.
atmospheric.agents.
2.4 Storage
.
The. unit. should. always. be. throughly. cleaned. and.
adequately.protected.when.stored.for.long.periods.
of.time.
Disconnect.the.controller.from.the.magnetic.chuck.
and.from.the.power.supply.
It.is.generally.advisable.to.cover.the.unit.with.a.wa-
terproof.bag.and.store.it.in.dry.and.safe.place.
The. temperature. of. the. storage. area. should. range.
between.0°C.(32°F).and.55°C.(131°F).
Relativy.humidity.should.be.between.30%.and.90%,.
non.condensing.
The. atmosphere. should. be. clean,. free. from. acids,.
corrosive.gases,.salts,.etc
When.restarting.the.machine,.always.follow.the.in-
structions.provided.in.Chapter.4.
