Tecnoma RAMPE VITIFIX Скачать руководство пользователя страница 13

Страница: 13 / 47

July-2015

– GENERAl SAFETy –

IMPORTANT

Indicates an obligation

Failure to behave properly or to perform the actions described in the recommendations could lead to

accidents or malfunction.

REMARK

Indicates information or advice on use

This advice will enable you to operate your machine to the full.

3.5 - RECOMMENDATIONS PRIOR TO uSE

3.5.1 - THE USER INSTRUCTIONS

THE MANUAL

•

Must always be accessible to users and maintenance personnel and should be kept where the

machine is used. It must also be understood.

3.5.2 - PERSON PROTECTION

Having a first aid kit on hand is strongly recommended

WARNING

Phytosanitary products, oils,

anti-freeze, solvents and fuels.

Follow the manufacturers' instructions in order to

use these products in safety.

To avoid any contact with the skin, eyes and mouth,

provide the user with protective gear bearing
the label

Example of personal protection equipment:

• gloves and overalls that are resistant to

chemical agents

• waterproof safety footwear

• face protection

• protective goggles

• respiratoryg protection

• etc.

In the event of an incident, consult a doctor and bring the label of the product.

Via the mucosa (eyes)

•

splashing

•

rubbing

the

eyes

with

contaminated hands

via the respiratory system

•

dust

•

spray mist

•

vapour

via the digestive system

•

eating, drinking and smoking during

application or after treatment with

unwashed hands

•

accidental ingestion

via the skin

•

splashing

•

contact with the treated cultures

Main pathways of contamination

Содержание RAMPE VITIFIX
















































Результаты поиска

Содержание RAMPE VITIFIX

Отзывы:

Похожие инструкции для RAMPE VITIFIX

Бренды по названию

Популярные бренды

Tecnoma RAMPE VITIFIX, Регулировка, использование и обслуживание

Результаты поиска

Содержание RAMPE VITIFIX

Отзывы:

Похожие инструкции для RAMPE VITIFIX

Бренды по названию

Популярные бренды