Tecnoma Novatec Isobus Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 31

Tecnoma Novatec Isobus Скачать руководство пользователя страница 6

INSTRUCTIONS FOR USE

OF REGULATIONS

NOVATEC ISOBUS AND NOVATOP

Tecnoma technologie – 54, rue Marcel Paul – BP 195 – 51206 Epernay

Tel +33(0)3 26 51 99 99 – Fax +33(0)3 26 51 83 51

e – mail

[email protected]

-

www.tecnoma.com

SAS with a capital of 1 174 400 € – RCS Epernay B 350 484 309 – APE 293D

990025

Mars 2012

Page

6/31

Please read carefully the

Please read carefully the

Please read carefully the

Please read carefully the fo

fo

fo

following tips

llowing tips

llowing tips

llowing tips and safety

and safety

and safety

and safety instructions:

instructions:

instructions:

instructions:

Do not remove the stickers or the security mechanisms.

Read and understand this manual before using the device. It is also important that
other operators of this device read and understand the manual.

Turn power off during maintenance or when using a charger (remove the ISOBUS
plug).

Never undertake maintenance or repairs on the device with the module on.

When performing welding works on the device or on a towed device, the
connection plug must be disconnected (remove the ISOBUS plug).

Use clear water for your tests. Use chemical products only when all properties are
known.

Keep children away from the device.

Do not expose the terminal and controller(s) and sensors to the direct beam of a
high pressure cleaner.

The controller should not be opened. Any such manipulation leads to an
immediate and irrevocable loss of the guarantee.

Turn the keys with the fingertip. Avoid using the nails.

If  part  of  this  guide  should  remain  beyond  understanding  after  reading  it,  get  in
touch  with  your  dealer  or  the  customer  service  department  of  Tecnoma
technologies for any further explanation.

Read carefully all the safety instructions in the manual and the safety stickers of
the device.

Safety  stickers  must  always  be  in  a  clearly  readable  state.  Replace  missing  or
damaged stickers. Make sure that new parts of the device are equipped with the
latest  safety  stickers.  You  must  order  the  replacement  stickers  from  your
authorized distributor.

Keep the device and all its parts in a good condition. Unauthorized modifications
or  misuse  may  affect  the  smooth  functioning  and/or  the  safety  and  influence  on
the life of the device and eliminate the device’s guarantee.

«
...
4
5
6
7
8
...
»

Содержание Novatec Isobus
































Отзывы:

Нет отзывов