Tecnoma Novatec Isobus Скачать руководство пользователя страница 11

Страница: 11 / 31

INSTRUCTIONS FOR USE

OF REGULATIONS

NOVATEC ISOBUS AND NOVATOP

Tecnoma technologie – 54, rue Marcel Paul – BP 195 – 51206 Epernay

Tel +33(0)3 26 51 99 99 – Fax +33(0)3 26 51 83 51

e – mail

[email protected]

www.tecnoma.com

SAS with a capital of 1 174 400 € – RCS Epernay B 350 484 309 – APE 293D

990025

Mars 2012

Page

11/31

5.3

Settings

Settings screens

screens

Settings

Settings page 1

page 1

Settings

Settings page 2

page 2

Settings

Settings page 3

page 3

5.3.1

Machine data

Machine data page

page

page 1

Setting

Description

Dose

Volume per programmed hectare. l/ha (liters/hectare)

Nozzle

Choice of work nozzle. The choice has n

Choice of work nozzle. The choice has no bearing on the regulation. By

o bearing on the regulation. By

choosing the work nozzle, the pressure is calculated and displayed on the

choosing the work nozzle, the pressure is calculated and displayed on the
work screen.

work screen.

Boom

Boom n°

n°

Two boom widths are possible. Choose the width of the job.

This value must match the number of nozzles per section, because it

influences the

influences the surface

surface

surface extent and the

extent and the

extent and the quantity spread

quantity spread

quantity spread....

Wheel

Wheel n°

n°

Three types of wheels are possible. Choose the mounted wheels for the

Three types of wheels are possible. Choose the mounted wheels for the
ongoing job.

ongoing job.

Regulation f

Regulation fact

act

actor

The regulation factor adjusts the responsiveness of the regulation. If during

The regulation factor adjusts the responsiveness of the regulation. If during
an applic

an applic

an application at constant speed the amount currently

ation at constant speed the amount currently

ation at constant speed the amount currently spread

spread

spread should differ

should differ

from that required, the constant factor must be reduced. If during a change

from that required, the constant factor must be reduced. If during a change
in speed the

in speed the

in speed the spread

spread

spread quantity does not fit quite quickly to the required value,

quantity does not fit quite quickly to the required value,

the factor should be increased.

Press

ess

essure

ure

ure max.

max.

Pressure value calculated to the maximum before the outbreak of an

Pressure value calculated to the maximum before the outbreak of an
warning. This setting has no impact on the regulation.

warning. This setting has no impact on the regulation.

Pres

Pressure

sure

sure min.

min.

Pressure value calculated to the minimum below which the warning is

Pressure value calculated to the minimum below which the warning is
triggered. This setting has no impact

triggered. This setting has no impact

triggered. This setting has no impact on the regulation.

on the regulation.

Speed

Speed min.

min.

Speed below which spraying is cut off.

The

The logo

logo

app

appears then in the work mask.

ears then in the work mask.

Speed

Speed auto min.

auto min.

Speed below which the system no longer regulates the flow of the sprayer.

Speed below which the system no longer regulates the flow of the sprayer.
The system goes into manual mode below th

The system goes into manual mode below th

The system goes into manual mode below this

is speed.

speed.

speed. If the

If the

If the defined

defined

defined value

value

is 0, the function is disabled.

is 0, the function is disabled.

Th

The logo app

e logo app

e logo appears

ears

ears as soon as the speed is below the minimal auto

as soon as the speed is below the minimal auto

speed.

Please make sure that the minimal speed is lower than the minimal auto

Please make sure that the minimal speed is lower than the minimal auto
speed. Otherwise, only the minimal speed will b

speed. Otherwise, only the minimal speed will b

speed. Otherwise, only the minimal speed will be taken into account.

e taken into account.

Содержание Novatec Isobus
































Результаты поиска

Содержание Novatec Isobus

Отзывы:

Tecnoma Novatec Isobus, Руководство по эксплуатации, Страница: 11 / 31

Результаты поиска

Содержание Novatec Isobus

Отзывы: