TECNOEKA EKF 1664 UD, Инструкция по использованию

Страница: 6 / 24

_______________________________________________________________________ use and instruction manual
pag 6 _________________________________________________________________________________________
3. Technical specifications
Modd.
EKF 1664 UD
EKF 2011 UD
Dimensions of
appliance
height
(with feet)
cm 192
width cm 98,5
depth
cm 103
Weight (Kg) 244,5
Maximum load per tray:
Kg 4
Electrical power:
Convection
resistors
5 kW 28,5
Convection heating element (kW) 30
Class I
Degree of protection against humidity IPX3
Water pressure kPa 100 – 200
Power supply voltage (V)
400V 3N

50 Hz
Power cable diameter: 5G 10 (5 x 10 mm
2
)
Type of cable H07RN-F
Connecting electric cable: Tipo : Y
The noise level of the appliance in operation is below 70 dB (A).
4. Instructions for the installer
The following instructions are aimed at the skilled installer for them to perform installation,
electrical and water connection operations in the most correct manner and according to the
safety regulations in force in the place of installation of the appliance.
The manufacturer shall not be liable for damage or harm to persons, pets or property arising
from installation errors. Nor are they responsible for any appliance breakage caused by faulty
installation.
4.1 Storage
In the event the appliance has been warehoused at temperatures below 0°C (maximum allowed
– 5°C), it must be brought back to a temperature of at least +10°C before operating it.
4.2 Transport of the appliance
During transport the appliance must be left in its packaging in order to protect it from any
external damage.
The weight of the appliance must also be taken into account in order to prevent overturning.
4.3 Unpacking the appliance
Remove packaging before installation. It consists of a wooden pallet supporting the appliance
and a cardboard casing protecting it. Ensure the appliance has not undergone any damage
during transport; otherwise immediately alert your dealer and/or carrier.
4.4 Removal of the protecting film
Before using the appliance accurately remove the special film protecting the stainless steel
components, avoiding to leave glue residues on the surfaces; if required, immediately remove
them using an appropriate solvent of non-flammable type.
4.5 Disposal of packaging
The packaging must be disposed of in strict compliance with the regulations in force in the
place of installation of the appliance. The various materials (wood-paper-cardboard-nylon-metal
staples) the packaging consists of must be suitably separated and delivered to the suitable
collection centres. In any case adhere to environmental protection regulations.