SERIE M
| User and Maintenance Manual | EN
37
5 MULTIPLEX INSTRUCTION
All the operations reported in this chapter must be carried out with the unit in stop position
and with the power of the unit and of the condenser unit switched off.
These operations must only be carried out by specialised qualified staff.
5.1 OPERATIONS NEEDED BEFORE JOINING THE EQUIPMENT SECTIONS
1.
Togliere l’imballo del mobile;
2.
Sistemare il mobile frigorifero in
posizione perfettamente orizzon-
tale, agendo se necessario sulla
regolazione dei piedini a vite sulle
gambe del banco per regolarne
il livello e verificare la planarità
con una bolla ("1.4 POSIZIONA-
MENTO E REGOLAZIONE PIE-
DINI" Pag. 6);
3.
Individuare le 3 viti (B-C-D), il
gancio (A) e la spina per il col-
legamento elettrico (E), poste sul
lato del banco.
A
B
C
D
E
5.2 JOINING INSTRUCTIONS
Before multiplexing two or more sec-
tions, siliconate (4) the side part of the
bench with two rows of silicone (white-
line). The same operation must be per-
formed on the other side of the other
equipment sections to be multiplexed.