Tecnet TS-2116, Руководство пользователя

Страница: 7 / 16

08 07
Attaching & Removing
Attaching & Removing the Battery
1. For attaching, slide the battery up from the bottom
until it locks securely into place. (figure 1)
2. Before removing, make sure the radio is turned
off. For removal, push the battery lock and slide the
battery downwards. (figure 2)
Attaching & Removing the Belt Clip
To attach the belt clip, secure the belt clip with the 2
screws provided (Phillips head screwdriver
required). To remove, reverse the screws and the
belt clip can be removed. (figure3). Note: the belt
clip does not need to be removed to remove the
battery.
Attaching & Removing the Antenna
1. To attach, insert the antenna into the connector on
the top of the radio by holding the antenna at its
base and rotate the antenna clockwise to fasten it.
(figure 4)
IMPORTANT: Do not over tighten
antenna as it will cause damage to the radio.
2. To remove, hold the antenna at its base and rotate
the antenna counter clockwise until you can remove
it. (figure 5)
Attaching External Audio Accessories
Pull down the cover of earphone/microphone jack
and insert the correct audio accessory into the jack.
Please make sure that the proper audio accessory is
being used and that it is properly seated in the jack.
(figure 6)
Attaching & Removing Attaching & Removing
(figure 1) (figure 2)
(figure 3)
(figure 4)
(figure 5)
(figure 6)