Sirio HH
Use and maintenance manual
Page 16 of 28
Instruction n°
192
- Rev.
02
of 06/07/2016
EN
Copyright © 2016 Tecmec S.r.l.
Translated from the original instructions
Additional operations for dispenser with 2 or more columns
O
Remove the plastic cap located on the
right side of the motor module.
Fit the over turning extensions on the
module without the motor.
Locate , place side by side the
module without the motor, to the one
with the motor already secured
against the wall.
P
Remove the front panel of the
basement
Secure the two structure using
toothed washer and M6 srews.
Q
Connect the reducers through the
shaft and transmission joints.
R
Overlap and secure the successive
modules as step
G-H-I-L.
