TECMACH IC3, Инструкция по эксплуатации

Страница: 8 / 14

5
1, first of all, press set key, the number “1” in
“15:00 “ will be flashing on screen, press the + and
-
keys, you can define your own time. Press
set
key
one time, the first number will be flashing. Press
twice, the second number will be flashing. And so
on, you can define your own time. After changing
all the numbers, you can press enter key to
confirm.
2, you firstly need to press the Cooling key when
made ice cream, next press the rotate button that is
at the bottom of the
Cooling
key, then start to
make ice cream. After production is completed,
you need to press the
stop
button and then choose
discharging button.
The position of ice cream Vertical Batch Freezer
is a very important issue that can compromise
proper machine operation. Correct positioning
influences the life of the ice cream Vertical Batch
Freezer and its spare parts. Above all, however, it
affects system operating expenses. We advise you
to follow carefully the instructions below.
Our technical servicing office can give you any
additional clarifications that may be needed.
6.1 Make sure that ice cream is put on the desktop.
Horizontal.
6.2
Make sure the normal heat radiation of the ice
cream Vertical Batch Freezer; nothing is to be
placed in front of the heat discharge panel.
side panel No things Side/back panel No things
These two methods are prohibited discharge.
Furthermore, please NEVER place the ice cream
Vertical Batch Freezer at
：
·Door
·Window
·Sources of heat (e.g. heaters etc.
）
.The ice cream Vertical Batch Freezer must
be protected from the direct irradiation of sunlight,
and never be placed outdoors in case it causes any
negative effects to the customers or operators.
Caution
：
1
）
Do not place the power cable in a transit
area in case it harms people pass by.
2
）
Never touch the power plug with wet
hands.
3
）
Make sure the power mains network is
earthed in accordance with the regulations in force.
4
）
Never insert any adapters or multiple
plugs on the supply plug used to connect the ice
cream machine.
5
）
Never use extensions to connect the ice
cream machine.
6
）
Make sure that the mains voltage
complies with the data listed on the nameplate of
the machine (Maximum allowable variation ±6%.).
6
INITIAL STARTUP OF THE ICE
CREAM VERTICAL BATCH FREEZER