TECMACH IC3, Инструкция по эксплуатации, Страница: 2 / 14

2
Before conducting any type of operation,
disconnect the machine from electrical mains.
This manual has been drawn up by the
manufacturer and is an integral part of the machine
supply. The information it contains is for
non-qualified (inexpert) and qualified personnel.
This manual defines the purpose for which the
machine was built and it contains all necessary
information to ensure its proper installation and
safe correct operation.
Other technical information that is not
included in this manual is an integral part of the
technical file prepared by EASY BEST and is
available at its facilities.
Constant observance of the regulations it
contains will guarantee personnel and machine
safety, low-cost operation and longer operating
life.
The careful analysis done by EASY BEST has
made it possible to eliminate most of the risks.
However, be sure to follow all the instructions
given in this manual. Always refer to the manual
before carrying out any operation. Safeguard this
manual and make sure it is always available next to
the machine or nearby.
The diagrams and drawings are furnished by
example. In pursuance to its policy of constant
development and updating. The manufacturer may
make any changes without giving advance notice.
This manual must be kept for the entire life of
the machine. If it is lost or destroyed, you can
request a copy from manufacturer. Be sure to
indicate the data listed on the nameplate (the price
will be established by the manufacture).
EASY BEST welcomes any comments from
clients concerning improvements to be made on
the machine and will assess their implementation.
This document is the exclusive property of
EASY BEST and cannot be divulged to third
parties, either in whole or in part, without the
written authorization of EASY BEST.
EASY BEST reserves all legal rights.
All the measurements listed in this manual are
expressed in mm.
GUIDE TO THE MANUAL
Be sure to consult this manual before
proceeding with installation, use and any
other work on the machine