5
ENG
INSTALLATION
Unscrew hinge cover by
Philips screwdriver.
Disconnect the harness.
1
2
1
2
If kitchen door is not wide enough to pass the refrigerator, handle and doors can be removed according to bellow process.
Remove the handles
Tool required: Hex wrench in accessary bag.
• Ensure the unit is unplugged and empty.
• All parts removed must be saved to do the reinstallation of the door.
Remove the doors
Tools required: Philips screwdriver, Flat bladed screwdriver.
• Ensure the unit is unplugged and empty.
• To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on something solid so that it will not slip during the
door removing process.
• All parts removed must be saved to do the reinstallation of the door.
• Do not lay the unit flat as this may damage the coolant system.
• It’s better that 2 people handle the unit during assembly.
Unscrew handles with Hex wrench.
Pull the handles to remove them.
After the appliance is positioned, install the handles by reversed
process.
