Subject to technical modifications without prior notice.
TP-40.1-12/4
36 Connection and function of Warning lamp and traffic light
Activate hold-open-time
5
Press TS briefly until LED red and yellow begins to flash in sec.
Now start counting and choose time (from 1~300 sec).
Press TS 1 sec. again until LED red and yellow turn off.
Attention:
To avoid any failure, please switch off the power supply and pull out the plug 230V,
then data can be erased.
If automatic closure is on (DIP1= ON), then hold-open-time will count in time to when the door has
arrived at it's closed position. If hold-open-time is already counted then the door will close automatically.
Possible parameters are 0 sec. until 300 sec.
If the door is open and there is a signal given to the hand transmitter or radio transmitter the
automatic closure will start counting again. The automatic closure is free when counting time has
been finalised. The door will close if time has been finally counted and if no signal like hand transmitter
or radio transmitter was given.
Hold-open-time = Time until clearing-time start
1
Press TL 5 sec. until LED yellow lights permanently.
2
Press TL 5 sec. again until LED red lights permanently.
3
Press TL 5 sec. again until LED yellow begins to flash.
4
Press TL 5 sec. until LED red begins to flash.
