TechVision NS16P2P8, Руководство пользователя

Страница: 50 / 145

Live Preview Introduction NVR User Manual
44
Select the camera and then set the brightness, contrast, saturation and hue of the camera. Click
the “Advanced” button or in the camera list on the right side of the interface to pop up the
“Image Adjust” interface and then set the relevant setting items. Please refer to 5.3.4 Image
Adjustment for detailed introductions of these items.
You can click “Default” to restore the image settings to the default factory settings.
5.4.3 Mask Settings
Some areas of the image can be masked for privacy. Up to four mask areas can be set for each
camera. Click Start

Settings

Camera

Image

Mask Settings to go to the interface as
shown below. Select the camera and enable the mask. Click the “Draw” button and then drag
the mouse on the image area to set the mask area; click the “Delete” button to delete the mask
areas; click “Apply” to save the settings.