Techroutes LLDP, Конфигурация

Страница: 15 / 25

LLDP Configuration
13
Step16 no street-number-suffix
Deletes the suffix of the street number, such
as number 1/2 of A road.
Step17 no landmark
Deletes the landmark, such as Colombia
University.
Step18 no additional-location Deletes the additional location.
Step19 no name
Deletes the information about a resident,
such as
Joe’s haircut shop.
Step20 no postal-code Deletes the name of a postal office.
Step21 no building Deletes the information about a building.
Step22 no unit Deletes the information about a unit.
Step23 no floor Deletes the information about a floor.
Step24 no room Deletes the information about a room.
Step25 no type-of-place Deletes the type of a place, such as office.
Step26 no postal-community Deletes the name of a postal office.
Step27 no post-office-box
Deletes the name of a postal box, such as
12345.
Step28 no additional-code Deletes the additional code.
Step29 no country Deletes the name of a country.
Step30 no script Deletes the script.
1.3.11 Specifying a Port to Set the Location Information
The following commands can be used to set the location information for a port and
bear the location information in TLV.
Run the following commands in port configuration mode to set the location
information:
Procedure Command Purpose
Step1 config Enters the global configuration mode.
Step2 interface intf-type intf-id Enters the interface configuration mode.
Step3 location civic id Sets the location information of civic id.
Step4 location elin id Sets the location information of elin id.
Run the following commands in port configuration mode to delete the location
information:
Procedure Command Purpose
Step1 config Enters the global configuration mode.
Step2 interface intf-type intf-id Enters the interface configuration mode.