Techpro TRIDVR-EL8, Руководство пользователя

Страница: 231 / 276

HDCVI Standalone DVR User’s Manual
250
Figure 5-99
Please refer to the following sheet for detailed information.
Parameter Function
Protocol
Select the corresponding dome protocol.
Default setup is console.

Console is for you to use the COM or mini-end software to
upgrade or debug the program.

The control keyboard is for you to control the device via the
special keyboard.

Transparent COM (adapter) is to connect to the PC to transfer
data directly.

Protocol COM is for card overlay function.

Network keyboard is for you to use the special keyboard to
control the device.

PTZ matrix is to connect to the peripheral matrix control.
Baud Rate Select the baud rate.
Default setup is 115200.
Data Bit The value ranges from 5 to 8.
Default setup is 8.
Stop bit
There are three options: 1/1.5/2.
Default setup is 1.
Parity There are five options: none/odd/even/space/mark.
Default setup is none.
5.8.5.5 PTZ
The PTZ interface is shown as in Figure 5-100.
Before setup, please check the following connections are right:

PTZ and decoder connection is right. Decoder address setup is right.

Decoder A (B) line connects with DVR A (B) line.
Click Save button after you complete setup, you can go back to the monitor interface to
control speed dome.