Technosoft iPOS4808 BX-CAN-STO, Техническое описание

Страница: 34 / 38


Technosoft 2017 34 iPOS4808 BX-CAT-STO Technical Reference
3.6.9 Digital Outputs (OUT0, OUT1, OUT2/Error, OUT3/ Ready, OUT4)
Min. Typ. Max. Units
Mode compliance All outputs (OUT0, OUT1, OUT2/Error, OUT3/Ready) NPN 24V
Default state
Not supplied (+V
LOG
floating or to GND) High-Z (floating)
Immediately after
power-up
OUT0, OUT1,OUT4 Logic “HIGH”
OUT2/Error, OUT3/ Ready Logic “LOW”
Normal operation
OUT0, OUT1, OUT2/Error, OUT4 Logic “HIGH”
OUT3/Ready Logic “LOW”
Output voltage
Logic “LOW”; output at nominal current 0.8
V
Logic “HIGH”;
output current = 0,
no load
OUT2/Error, OUT3/ Ready 2.9 3 3.3
OUT0, OUT1, OUT4 4 4.5 5
Logic “HIGH”, external load to +V
LOG
V
LOG
Absolute maximum, continuous -0.5 V
LOG
+0.5
Absolute maximum, surge (duration
≤
1s)
†
-1 V
LOG
+1
Output current
Logic “LOW”, sink current, continuous OUT0, OUT1, OUT2,
OUT3, OUT4
0.5 A
Logic “LOW”, sink current, pulse ≤ 5 sec. OUT0, OUT1,
OUT2, OUT3, OUT4
1 A
Logic “HIGH”, source current;
external load to GND; V
OUT
>= 2.0V
OUT2/Error, OUT3/
Ready
2 mA
OUT0, OUT1 4 mA
Logic “HIGH”, leakage current; external load to +V
LOG
; V
OUT
=
V
LOG
max = 40V
0.1 0.2 mA
Minimum pulse width 2 µs
ESD protection Human body model ±15 kV
3.6.10 Digital Hall Inputs (Hall1, Hall2, Hall3)
Min. Typ. Max. Units
Mode compliance TTL / CMOS / Open-collector
Default state Input floating (wiring disconnected) Logic HIGH
Input voltage
Logic “LOW” 0 0.8
V
Logic “HIGH” 2 5
Floating voltage (not connected) 4.4
Absolute maximum, surge (duration
≤
1s)
†
-10 +15
Input current
Logic “LOW”; Pull to GND 1.2
mA
Logic “HIGH”; Internal 1K
Ω
pull-up to +5
0 0 0
Minimum pulse width 2 µs
ESD protection Human body model ±5 kV
3.6.11 Encoder #1 Inputs (A1+, A1-, B1+, B1-, Z1+, Z1-,)
1
Min. Typ. Max. Units
Single-ended mode compliance Leave negative inputs disconnected TTL / CMOS / Open-collector
Input voltage, single-ended mode A/A+,
B/B+
Logic “LOW” 1.6
V Logic “HIGH” 1.8
Floating voltage (not connected) 3.3
Input voltage, single-ended mode Z/Z+
Logic “LOW” 1.2
V Logic “HIGH” 1.4
Floating voltage (not connected) 4.7
Input current, single-ended mode A/A+,
B/B+, Z/Z+
Logic “LOW”; Pull to GND 5.5 6
mA
Logic “HIGH”; Internal 2.2K
Ω
pull-up to +5 0 0 0
Differential mode compliance For full RS422 compliance, see
2
TIA/EIA-422-A
Input voltage, differential mode
Hysteresis ±0.06 ±0.1 ±0.2
V
Differential mode -14 +14
Common-mode range (A+ to GND, etc.) -11 +14
Input impedance, differential
A1+, A2+, B1+, B2+, Z1+, Z2+ 2.2
kΩ
A1-, A2-, B1-, B2-, Z1-, Z2- 1.6
Differential mode 0 10 MHz
Differential mode 50 ns
ESD protection Human body model ±1 kV
1
Encoder #1 differential input pins needs termination resistors connected across; set SW3 pins 3,4 and 5 to ON
2
For full RS-422 compliance,
120Ω
termination resistors must be connected across the differential pairs, set SW3 pins 3,4 and 5 to
ON. See Figure 3.16. Differential incremental encoder #1
connection