Technosoft iPOS4808 BX-CAN-STO, Техническое описание

Страница: 32 / 38


Technosoft 2017 32 iPOS4808 BX-CAT-STO Technical Reference
3.6 Electrical Specifications
All parameters measured under the following conditions (unless otherwise specified):
T
amb
= 0…40
°
C, V
LOG
= 24 V
DC
; V
MOT
= 48V
DC
; Supplies start-up / shutdown sequence: - any-
Load current (sinusoidal amplitude / continuous BLDC,DC,stepper) = 8A iPOS4808
3.6.1 Operating Conditions
Min. Typ. Max. Units
Ambient temperature
1
0 +40 ºC
Ambient humidity Non-condensing 0 90 %Rh
Altitude / pressure
2
Altitude (referenced to sea level) -0.1 0 ÷ 2.5
2
Km
Ambient Pressure 0
2
0.75 ÷ 1 10.0 atm
3.6.2 Storage Conditions
Min. Typ. Max. Units
Ambient temperature -40 105 ºC
Ambient humidity Non-condensing 0 100 %Rh
Ambient Pressure 0 10.0 atm
ESD capability (Human body model)
Not powered; applies to any accessible part
±
0.5 kV
Original packaging
±
15
kV
3.6.3 Mechanical Mounting
Min. Typ. Max. Units
Airflow natural convection
3
, closed box
3.6.4 Environmental Characteristics
Min. Typ. Max. Units
Size ( Length x Width x Height )
Without mating connectors
103 x 71 x 16.4 mm
~4.06 x 2.8 x 0.65 inch
With recommended mating connectors.
109 x 79 x 19.5 mm
~4.3 x 3.1 x 0.77 inch
Weight Without mating connectors 125 g
Power dissipation
Idle (no load) 3.4 W
Operating 8.5 W
Efficiency 98 %
Cleaning agents Dry cleaning is recommended Only Water- or Alcohol- based
Protection degree According to IEC60529, UL508 IP20 -
3.6.5 Logic Supply Input (+V
LOG
)
Min. Typ. Max. Units
Supply voltage
Nominal values 9 36 V
DC
Absolute maximum values, drive operating but outside
guaranteed parameters
8 40 V
DC
Absolute maximum values, continuous -0.6 42 V
DC
Absolute maximum values, surge
(duration
≤
10ms)
†
-1 +45 V
+V
LOG
= 12V 130
mA +V
LOG
= 24V 90 280
+V
LOG
= 40V 85
3.6.6 Motor Supply Input (+V
MOT
)
Min. Typ. Max. Units
Supply voltage
Nominal values 11 50 V
DC
Absolute maximum values, drive operating but outside
guaranteed parameters
9 52 V
DC
Absolute maximum values, continuous -0.6 54 V
DC
Absolute maximum values, surge
(duration
≤
10ms)
†
-1 57 V
Supply current
Idle 1 5 mA
Operating
iPOS4808 -20 ±8 +20 A
Absolute maximum value, short-circuit condition
(duration
≤
10ms)
†
iPOS4808 26 A
1
Operating temperature at higher temperatures is possible with reduced current and power ratings
2
iPOS4808 can be operated in vacuum (no altitude restriction), but at altitudes over 2,500m, current and power rating are reduced
due to thermal dissipation efficiency.
3
In case of forced cooling (conduction or ventilation) the spacing requirements may drop down to mechanical tolerances as long as
the ambient temperature is kept below the maximum operating limit