Technosoft IO iPOS4808, Техническое описание

Страница: 5 / 44

© Technosoft 2013 I IO-iPOS4808 Technical Reference
Read This First
Whilst Technosoft believes that the information and guidance given in this manual is correct, all
parties must rely upon their own skill and judgment when making use of it. Technosoft does not
assume any liability to anyone for any loss or damage caused by any error or omission in the work,
whether such error or omission is the result of negligence or any other cause. Any and all such
liability is disclaimed.
All rights reserved. No part or parts of this document may be reproduced or transmitted in any
form or by any means, electrical or mechanical including photocopying, recording or by any
information-retrieval system without permission in writing from Technosoft S.A.
The information in this document is subject to change without notice.
About This Manual
This book is a technical reference manual for the IO-iPOS4808 VX-CAN/CAT extension boards
version 1.0B that are included in the iPOS4808 intelligent servo drives starter kits.
The IO iPOS360x extension board can be one of the following products:
iPOS480x VX-CAN IO
p/n P027.014.E880 For drives with CAN.
iPOS480x VX-CAT IO p/n P027.014.E890 For drives with EtherCAT.
Paragraph 2.4 shows how to quickly identity the IO-iPOS4808 version. If your IO-iPOS4808
is an older version, you can find the appropriate manual on the Technosoft web page.
Notational Conventions
This document uses the following conventions:
iPOS4808
–
any iPOS4808 VX-CAN or VX-CAT drive that can be connected to this I/O
extension
TML
–
Technosoft Motion Language