background image

    Clean the meas uring pins with  a slightly dampened cloth and dry it afterwards.  

    Check the device for  visible external damage before every use.  

    Check the measuring pins for damage before every use.  

 

Storage 

    Always attach the protective cap (1) to the device when not in use.  

    Always remove the batteries if the device will not be used for extended periods.  

    Store the device in a dry location. 

 

Precautions 

 

Do not subject the unit to excessive force or shock.  

 

Do not expose the unit to extreme temperatures, direct sunlight, dust or humidity.  

 

Do not immerse in  water.  

 

Avoid contact with any corrosive materials.     

 

Do not dispose this unit in a fire as it may explode.  

 

Do not open the inner back case or tamper with any components of this unit.  

 

Batteries safety warnings 

 

Don’t use rechargeable batteries.  

 

Install batteries correctly by matching the polarities (+/-).  

 

Remove exhausted batteries immediately. 

 

Remove batteries when not in use. 

 

Do not recharge and do not dispose of batteries in fire as the batteries may explode.  

 

Ensure batteries are stored away from metal objects as contact may cause  a short circuit. 

 

Avoid exposing batteries to extreme temperat ure  or humidity or direct sunlight.  

 

Keep all batteries out of reach  from children. They are a choking hazard.  

 

Use the product only for its intended purpose! 

 

Consideration of duty according to the battery law 

Old  batteries  do  not  belong  to  domesti c  waste  because  they  could  cause 
damages  of  health  and  environment.  You  can  return  used  batteries  free  of 
charge  to  your  dealer and  collection  points.  As  end-user  you  are  committed  by 

law to bring back needed batteries to di stributors and other collecting points!  
 
Consideration of duty according to the law of electrical devices 

This  symbol  means  that  you  must  di spose  of  electrical  devices  separated  from 
the General household waste when it reaches the end of its useful life. Take your 
unit  to  your  local  waste  collection  point  or  recycling  centre.  This  applies  to  all 
countrie s  of  the  European  Union,  and  to  other  European  countries  with  a 

separate waste collection system. 
 

 

Содержание WZ 1300







Отзывы: