EN5
is lower than 20%, the LCD would display
(5) Outdoor Temperature Alert Function
Press “ALERT” button (B7) to select to activate or deactivate outdoor temperature alert function.
press ALERT button select to:
Active outdoor upper temperature alert, the icon “
” besides outdoor temperature digit would
display.
Active outdoor upper& lower temperature alert, the icon “
” besides outdoor temperature digit
would display.
Active outdoor lower temperature alert, the icon “ ” besides outdoor temperature digit would
display.
Deactivate outdoor temperature alert, alert icon disappear.
Hold “ALERT” button (B7) for 3 seconds to enter outdoor temperature alert setting. Icon “
” or
“
” beside Temperature’s digits flash. Press “
▲
” or “
▼
“button to adjust the setting value, press
“ALERT” (B7) to confirm the setting. Setting Sequence as follow: Upper limit of temperature, Lower
limit of Temperature.
When it’s alert, the corresponding icon “
” or “
” and temperature digit would flash on the LCD.
Press any buttons to stop the alert sound
,
otherwise, it will sound for 2 minutes, and stop
automatically.
(6) Comfort Indicator
(A1) for the display of pleasant/unpleasant climate.
7. Time and Alarm Setting
7.1 Radio Controlled Clock:
After batteries inserted and main unit finishes receiving the transmission from outdoor sensor, the
clock automatically starts to scan the DCF time signal. Radio Control Icon“
” flashes on the LCD.
flashes
，
Indicating now is receiving
DCF signal
turns on,
Indicating signal received
successfully
disappear,
Indicating signal reception
failed
The clock automatically scans the time signal at 3.00 a.m. every day to maintain accurate timing. If
reception fail, scanning stops (“
” on LCD disappear) and repeats again at 4.00 a.m. 5.00a.m.
and6.00a.m.
The clock can be set to scan the time signal manually by holding “
▲
” and “
▼
buttons (B9 &B8) for 3
seconds. Each reception takes about 5 minutes. If receptions fail, scanning stops. (“
” on LCD
