EN3
pushing the button inside the compartment. Close in the
battery compartment
Open the battery compartment on the rear side of the
base station and insert 2 x AAA batteries. Please observe
the correct polarity. Close the battery compartment.
After inserting the batteries, all the icon on the LCD
display will briefly light up for 3 seconds.
The base station will now start to make a connection to
the outdoor sensor. This operation takes about 3 minutes
and is displayed by a flashing reception radio antenna
symbol in the “OUTDOOR” display area on the base
station.
Manual time setting:
Press
“
SET
” for about 3 seconds to confirm your setting,
the 12/24 hour mode display starts to flash. Press the
“
+
”
button to set the correct 12/24 hour mode.
