Technoline WS 6760, Руководство пользователя

Страница: 15 / 77

EN4

Increase, change the values in manual setting mode, the height setting mode, weather icon
selection

Switch between display the current, minimum, maximum indoor, outdoor temperature and
indoor, outdoor humidity

Press the button for about 3 seconds to reset the MIN / MAX values

To stop the alarm
C "-" button

reduction, of values in the manual setting mode, the height setting mode, weather icon
selection

Switching between temperature display in ° C or ° F

Press the button for 3 seconds to enter the temperature alert setting mode

To stop the alarm
D "HISTORY" button

Press the button for 3 seconds to enter the altitude setting mode, to advance and to select
the following settings: height adjustment, weather forecast icon, choose between air
pressure unit hPa or inHg

To stop the alarm
E "CHANNEL" button

Press the button for about 3 seconds to search for an external transmitter on channel 1,2 or
3

change of external temperature channels and continuous switching display of the outside
temperature channels

To stop the alarm
F "SNOOZE / LIGHT" button

Press to activate the snooze function while wake up alarm rings

activation of the backlight
Initial Operation

Open the battery compartment located on the rear side of the outdoorsensor and
weatherstation. Place the batteries in the battery compartment. Please pay attention to the
polarity.

The altitude flashes , please use
“
+
“, “
-
“to set the altitude of your position (in meters), then
press
“HISTORY”
, hPa flashes, press the "+", "-" button to select between the air pressure
units hPa and inHG, press
“HISTORY”, weather symbol flashes, pls use “
+
“
,
“
-
“ to select the
weather symbol that fits the current weather

The station is now connecting to the outdoor sensor. This process takes about 3 minutes.
Then the display shows the outdoor temperature and humidity, in case of failure of reception
please press
“CHANNEL“
for more than 3 seconds to restart the search process again.

The automatic reception of the DCF radio signal starts after 3 minutes of outdoor reception

While the RCC reception process is going on, t
he flashing symbol “radio tower“ appears in
the time display area

Once radio signal reception was successful, the display shows a static
“radio tower“ symbol