Technogym Step 500i, Руководство по техническому обслуживанию

Страница: 160 / 182

STEP EXCITE: Service & maintenance manual - rev. 1.4
Page 9.20
9.3.4.4. View Errors
For every error generated by the machine, the error history log records the information in the table
below:
•
Counter
•
Error code
•
date (dd-mm-yyyy – hh:mm) (NOT present on ARM display board models)
•
Current when the error occurred
•
Distance in km when the error occurred
The correspondence between error codes and descriptions is given in the table below:
Error Code Description
1
OVERHEATING: this condition occurs when the temperature detected by the
sensor on the circuit board exceeds 90°C.
8
OVERVOLTAGE: this condition occurs when the +12 Vdc voltage goes above
13.7 Vdc (only on the 500i, 700i and 700i Emodels).
Use the
+ effort level key to advance to the next error, otherwise the message with the details of the
current error will continue to reappear.
9.3.5. S
TANDARD SETTINGS
This function clears the operating data of the machine and simultaneously resets the brake board
parameters to their default values. To access this menu, when the display shows:
STANDARD SETTINGS ?
press
ENTER , the following message appears:
CONFIRM ?
Press
ENTER again to reset all parameters to their default values, or return to the upper menu level
by pressing CLEAR for a few seconds.
This function does not alter the language and the TV standard setting.
9.3.6. L
OW KIT MENU
This function directly accesses the firmware of the brake board. To access this menu, when the
display shows:
LOW KIT MENU
press
ENTER . This function is structured as follows: