manualshive.com logo in svg

Technogym Step 500i, Руководство по техническому обслуживанию

Поделиться
Скачать
Technogym Step 500i Скачать руководство пользователя страница 12

 

STEP EXCITE: Service & maintenance manual - rev. 1.4

 

Page 1.2 

1.3. 

 

GENERAL RULES FOR REPAIR PROCEDURES 

1.

 

Always mark any parts or positions which may be confused with each other at the time of 
reassembly. 

 
2.

 

Use original Technogym spare parts and lubricants of the recommended brands. 

 
3.

 

Use special tools where specified. 

 
4.

 

Consult the Technical Newsletters, which may contain more up-to-date information on 
adjustments and maintenance than those contained in this manual. 

 
5.

 

Before starting the repair procedure, make sure that the recommended tools are available and in 
good condition. 

 
6.

 

For the procedures described in this manual, use only the specified tools. 

 

  OBSERVE: The tool sizes quoted in this manual are expressed in mm. 

 

Содержание Step 500i























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды