RECLINE EXCITE: Service & Maintenance Manual - rev. 1.1
Page 9.7
9.2. SERVICE MENU CONFIGURATION
The machine configuration procedure is invoked, when the machine is in standby mode, by
simultaneously pressing the keys
369
. The following prompt appears on the LED display:
ENTER PASSWORD:
To access the procedure, type in the password
2501
which protects against unauthorized access and
press the “Enter” key to confirm. At this point there are two options available:
1 = Tech Config
2 = Troubleshooting
Press the number key
1
to access the menu for configuring technical parameters; the machine
display begins showing the current configuration, structured as in the diagram below:
TECHNICAL
CONFIGURATION
OPERATING
DATA
LOW KIT
MENU
TIME AND
DATE
LOW KIT
PARAM.
HIGH KIT
VERSION
STANDARD
SETTINGS
ERRORS LOG
To scroll through the list of parameters, press the
+
or – effort level keys to display the next or the
preceding item.
To modify a parameter value, it is necessary to press the
ENTER
key: when the current parameter
value starts to blink, press the
CLEAR
key to erase the current value and then use the number keys
to enter the desired new value. Save the changes made by pressing the
ENTER
key.
To cancel the operation, press the
CLEAR
key for a few seconds.
The various parameters are described below.
9.2.1. T
IME AND DATE
This function sets the internal clock of the lower assembly. To access this menu, when the LED
display shows:
TIME AND DATE
press
ENTER
. This function is structured as follows:
Содержание Recline Forma
