Technogym Recline 500, Руководство по техническому обслуживанию

Страница: 56 / 182

RECLINE EXCITE: Service & Maintenance Manual - rev. 2.4
Page 4.10
Figure 4.5-11
34. Remove cover plate h , backing off the 4
screws i using a Phillips screwdriver.
Figure 4.5-12
35.
such a
36. na connector board 2 with
ewdriver.
37. Connect cable 9 (CB-9) to connector board
2 .
Insert external connector board 2 along the
special guides on cover plate 1 , in
way that the connectors on the board match
up with the holes on the cover plate.
Secure exter l
screws and washers 4 and 5 , using a Phillips
scr
Figure 4.5-13
38. Assemble cover plate 1 inside the rear
display housing, using the 4 screws 3 and a
Phillips screwdriver.
Figure 4.5-14
39. Remove the covering from the LED display,
backing off the 3 screws l using a Phillips
screwdriver.
40. Unplug the TGS cable, if present.
Continued on following page
→