Technogym EXCITE+ VARIO, Техническое обслуживание руководство

Страница: 148 / 171

- VARIO: Technical service guide- Ver. 2.1
Page 9.16
9.3.3.3. Default Setting
To load the default parameter values, scroll using the +/- effort level keys until the display shows:
DEFAULT SETTING ?
Press ENTER. display shows:
CONFIRM ?
press ENTER to write the default values to the low kit, and return to the upper menu level by
pressing CLEAR for a few seconds.
To write these parameters to the low kit, use the “Write to low kit” function.
9.3.3.4. Table of configuration parameters:
Id
(Par.)
Units Name Description
LED
powered
Self-
powered
1 decimal [Rt] Transmission Ratio 140 140
2 [Rvel]
Speed ratio
1 1
3 mA [Im]
Minimum braking
0 0
4 W [Pmc] Constant maximum power 200 200
5 in cent [Km] Power factor correction (constant torque) 100 100
6 0.1N [Ca]
User friction torque
40 40
7 °C [Tea] Maximum temperature on the coil 125 125
8
User
Rpm
[RPMmin]
Minimum user SPM
(start cut braking ramp)
35 35
9 Type/sec [RpmF1]
Flywheel target RPM speed in standby
(and power-on speed for self powered)
1 1
10 User Rpm [RpmF2] Rpm filter threshold
75 75
11
[Rvel] Speed ratio (decimal part)
60 60
12 0.1N [D_Ca]
User delta friction torque
10 10
13 - - Enable flag
for registers at address ≥ 100
- -