Technogym BIKE ARTIS, Руководство пользователя

Страница: 22 / 29

22
BIKE ARTIS
ROUTINE MAINTENANCE
The product should always be kept clean and free of dust, in compliance with common health and hygiene standards.
To clean the display , proceed as follows.
- Turn off the product by pressing the main switch to the “0” position.
- Take the product’s power plug out of the wall socket.
- Clean the display using a damp (not wet) cloth.
Clean the entire product once a week.
- Turn off the product by pressing the main switch to the “0” position.
- Take the product’s power plug out of the wall socket.
- Clean outer parts with a damp sponge.
Do not use chemical products or solvents.
Warnings
Do not press too hard on the display or the illustrations and instructions on the labels.
The safety of the product is assured only on the condition that it is carefully inspected every two weeks for any signs of damage and/or wear.
Replace defective or worn components immediately, or remove the product from service.
For maintenance actions not described in this manual, call in the Technogym Technical Service.