4
lights to indicate the controller is in “Learn Mode”.
b: Press and release the station toggle switch based on the graphic below that
will determine which scenes the DMX controller will recall.
The LEARN LED will go out acknowledging a successful Link operation.
Switch / Scenario One
•
Press and release the top left button toggle of the dual switch to link scenes
one and two to the left toggle switch on the station.
•
Press and release the top right button on the toggle station to link scenes
three and four to the right toggle switch on the station.
Switch / Scenario Two
•
Press and release the bottom left button on the toggle station to link scenes
five and six to the left toggle switch on the station.
•
Press and release the bottom right button on the toggle station to link
scenes seven and eight to the right toggle switch on the station.
CAUTION: DO NOT
link both the top and the bottom of the same toggle switch
on the dual switch as this will cause the DMX Scene Controller to malfunction. If
you have mistakenly done this, you must clear the controller of all stations and
begin the process of linking again. Reference Step 1 for instruction:
If this is the very first time linking switches to the DMX Scene controller, the
scenes will be preset to the factory default values. All 48 DMX channels will be
set to the same level, with scene 1 being the brightest and scene 8 being the
dimmest.
SCENARIO #1
SCENARIO #2
Press and
release here to
assign scene 1
and scene 2 to
buttons one and
two
Press and
release here to
assign scene 3
and scene 4 to
buttons three
and four
Press and
release here to
assign scene 5
and scene 6 to
buttons one and
two
Press and
release here to
assign scene 7
and scene 8 to
buttons seven
and eight
two
four
or
one three
two
four
three
one
NOTE: You must re-enter “Learn Mode” after linking
each toggle switch.