3
power.
b: Connect the red wire to the incoming positive AC or DC power
5. Connect the DMX output wiring.
a: Using the included solder splices, connect the DMX wiring harness as
follows:
• D- to black
• D+ to red
• Shield/drain to green
•
The controller has an orange or blue external antenna. Do not cut,
cap or connect this wire.
6.
Replace the junction box faceplate.
7. Restore power to the circuit.
Linking Wireless Dual Switches
The process of linking an Echoflex Dual Switch to a DMX Scene Controller also
determines which of the DMX scenes each button on the station will recall.
Step 1: Perform a “Clear” function.
a: Press the Clear button on the DMX Scene Controller until the “CLEAR”
LED lights momentarily, and then goes out indicating that a clear has been
performed.
Step 2: Link a station to the controller.
a: Press and hold the DMX Scene Controller Learn button until the “LEARN” LED
B
LACK
(D-)
R
ED
(D+)
G
REEN
(
SHIELD
)
5-
PIN
XLR
(
DMX
INPUT
)
O
RANGE
(
ANTENNA
)
12-24
V
DC+ (
RED
)
12-24
V
DC- (
BLACK
)
WIRELESS
TO
OTHER
DEVICES
DMX S
CENE
C
ONTROLLER
(
ERDMX
)
DMX
C
ONTROLLER
(
TEMPORARY
)
DMX D
EVICE
(
BY
O
THERS
)
NOTE: You cannot program more than four scenes to
any one Dual Switch station.
