8
Call: 1-631-648-7481 or Visit: support.technocnc.com
9
HD II Tabletop Manual
NK105G2
Call: 1-631-648-7481 or Visit: support.technocnc.com
HD II Tabletop Manual
NK105G2
Single Keystroke Functions on the Handheld Pendant
Positive Feedrate
Override
(Input the number 7)
X- Movement
(Input the number 4)
Jog Speed Select
(Input the number 0)
Enter Manual Parameters
Screen
Change high/low speed
and XYZ step increment
Z+ Movement
(Input the number 9)
X+ Movement
(Input the number 6)
Z- Movement
(Input the number 3)
Menu Screen
(Input a decimal point)
Shift Key
Switch between
Jog and Step
modes
Down
Directional
Key
Set XY Zero Position
(Input a minus sign)
Stop
Cancel
Escape
Up Directional
Key
Pause
Start key
Spindle On/Off
(Input the number 5)
Negative Feedrate
Override
(Input the number 1)
Y+ Movement
(Input the number 8)
Y- Movement
(Input the number 2)
OK
Select
Bold Indicates Primary Function
(Parenthesis Indicates Secondary Function)
Yellow Keys represent movement
related keys
Blue Keys represent speed and
feed related keys
Shift Commands / Combination Keystrokes
To use the shift commands, you must press and hold the shift key and then select
a second key to use the Shift Command function.
Go to current work (relative) origin
Switch between work (relative) and machine (absolute)
Decrease spindle RPM
Go to XYZ home (mechanical origin)
Increase spindle RPM
Resume from breakpoint M0 command
Open help screen
Set Z zero position using Touch-Off pad
Set Z zero position manually not using Touch-Off pad
