Call: 1-631-648-7481 or Visit:: www.technocnc.com/technical-support/
18
HD II Tabletop Manual
NK105G2
4.4 How to Use the Select Line Number Function
A file that is currently loaded to the machine may be ran using only certain line numbers of the G-Code if the
operator chooses to do so. If the operator accidentally presses STOP, they can use this function to run from
the last ran G-code line number (For ex: N100). This can be done by using the select line number function on
the controller.
First,
turn the spindle on.
Then, go to the Main Menu, then go to the 3.Operations, then go to 3.Select Line
No., and then type in the corresponding line numbers you would like to start and stop at.
From the main screen, press Menu
to access the Menu screen.
Use the up and down
to move the cursor and highlight
3. Operations
Use the up and down
to move the cursor and highlight
3. Select Line No.
Go to the Start Line and End Line and enter in where you would
like to start and end the file. The End Line will automatically be
set as the last line in the G-Code unless you decide to change it.
Scroll
down
to
Execute
Now
and
press
OK
for
the file to run from the Start Line to the End Line.
If we take a look at this G-code, we can see that we will be
starting from line 200 and ending the G-code file at line 463
