Call: 1-631-648-7481 or Visit:: www.technocnc.com/technical-support/
17
HD II Tabletop Manual
NK105G2
7.5 How to Use all 6 Work Coordinates
This controller allows a user to have up to 6 work coordinates saved at a time. They are labeled as G54,
G55, G56, G57, G58, and G59. The controller should be automatically set for G54 (work coordinate system 1)
because next to X, Y and Z on the main screen should be a number 1. In order for the controller to use another
coordinate system like G55 (work coordinate system 2), there needs to be another number next to X, Y, and Z,
and in this case that would be number 2. In order to change between each coordinate system go to the Main
Menu, 3.Operations, and finally 6.Select WCS.
From the main screen, press Menu
to access the Menu screen.
Use the up and down
to move the cursor and highlight
3. Operations
Use the up and down
to move the cursor and highlight
6. Select WCS
Scroll through each of the WCS and press OK to
the work coordinate system that needs to be used
.
Labeled here is the multiple work coordinate origins that can be saved for certain parts or
fixtures. G54 represents Origin 1, G55 represents Origin 2, and G56 represents origin 3, etc
Origin 1
Origin 2
Origin 3
