Installation instructions
48
Installing the device
The controller can be used as a surface mounted device or as an integrated device:
Surface mounted controller with mounting base UVR 1611K-N
Fix the mounting base to the wall at eye level height (
approximately 1.6 m
) using the fixing
materials supplied. Cable entries for the 230 V supply and connection lines are at the bottom;
for the LV leads they are at the top.
Installation with terminal mounting plate UVR1611S-N
This installation method is intended for mounting inside a distribution board.
The terminal mounting plate can be mounted either by means of four fixing points
or
on a top-
hat rail (support rail TS35 to standard EN 50022).
The two lateral locking clamps also enable the controller to be clicked
into a
sheet steel front plate
.
Conversion of the version with mounting base to an integrated version
The terminal mounting plate is secured in the lower section of the mounting base.
It is removed from the mounting base by undoing both locking clamps using a screwdriver.
Содержание UVR1611K-N-D
Страница 2: ......
Страница 50: ...Installation instructions 50 Dimensioned drawings External dimensions mounting base ...