
31
Load...
Function data can be loaded from the SD card onto the CAN monitor or other X2 devices. More than
one set of function data can be saved on the SD card.
The data transfer is only possible after a
technician
or
expert
password
has been entered for the tar-
get device.
After selecting the function data required (*.dat file), you will be prompted to specify how the meter
readings and the heat meter's calibration values should be treated.
This prompt is irrelevant when loading function data onto the CAN monitor.
You can choose from the following actions:
Retain
The meter readings and calibration values in the controller will be
applied.
Example of use
: After programming is changed using TAPPS
Reset
The meter readings and calibration values will be reset
to zero
.
Load function data
The meter readings and calibration values applied will be taken from
the function data being loaded onto the controller.
Example of use
: Replacement of a controller. The function data is
taken from the old controller and its meter readings are to be loaded
onto the new controller.
Tapping
loads the new function data;
cancels the action.
Once the function data is loaded, the controller returns to the User level.