28
Changing the password
An
Expert
can change the passwords for
Technician and Expert. A
Technician
can
only change the Technician password.
There are no restrictions regarding the
length of the password or the type of
characters that can be used.
To change a password, you must first en-
ter the old password.
List of permitted actions
User
Displays and permitted actions
User
•
Function overview
with options for control
•
Access to main menu
only if enabled for "
User
" in the "General settings"
•
Inputs
:
display only,
no access to the parameters
•
Messages
: display of active messages
•
CAN bus
:
no access to the parameters
•
General settings
: language, brightness and display timeout can be altered
•
User
: change of user (with password entry)
Technician
All of the above plus
:
•
Access to main menu
only if enabled for
Technician
or
User
in the "General set-
tings"
•
Changes to the parameters for
inputs
•
General settings
: Changes to
user defined designations
and creation of new
ones
•
All settings in the
CAN bus
menu
•
Data administration
actions
Expert
All
actions and
all
displays are accessible.
Automatic changeover
Normally, the CAN monitor automatically switches back to
user mode
30 minutes
after login
as an
expert or technician.
For programming or test purposes, this automatic changeover can be switched off. To do so, an
expert selects "Change expert password", first enters the old password, then enters
nothing
(not "0"
either) and confirms this with the tick.
The same can be done for the Technician password.
