14
Sensor correction
The option of sensor correction is available for the measured variables The corrected value is utilised
for all calculations and displays.
Example
:
Average
This setting refers to the average of the measurements
over time
.
Averaging over 0.3 seconds leads to extremely rapid reactions on the part of the display and the unit.
However, this can be expected to cause fluctuations of the value.
A high average value results in lagging and is only recommended for special applications.
For simple measuring operations approx. 1-3 seconds should be selected.
Sensor check for analogue sensors
When "
Sensor check
" is active (setting: "
Yes
"), a short circuit or a lead break will
automatically
generate an error message: A
warning symbol
is displayed in the upper status line, and the defective
sensor is shown with a red border around it in the "
Inputs
" menu.
Example:
Short-circuit of
sensor 1
Standard value
