Programming with TAPPS2 / Functions
17
Functions
You can choose from 41 different functions and create up to 22 functions.
Functions can also be
applied multiple times.
Input variables
are assigned to every function. The input variables provide the function with all the
data required for the internal decision.
Each function can be activated or deactivated with "
Enable
".
Within each function, data and parameter settings are utilised in order to calculate the decisions and
set values, which are then made available as output variables.
A function can therefore only perform tasks in the overall system when connected by its respective
input and output variables to other parts of the system (other functions or the network).
The individual function modules are described in the UVR16x2, RSM610 and CAN-IO 45 manuals. This
manual only provides general information on how to program functions.
Selecting a new function
Working with TAPPS2 is described in the manual for
TAPPS2
(see "
Help / Manual
" menu item or "
F1
" key in
TAPPS2
).
Designation
After selecting and inserting the function in the drawing interface, you define the function designation.
Example
: Analogue function
Enter the function designation by selecting a predefined designation from a "general" designation
group or from user defined designations.
You can also assign a number from 1 to 16 to every designation.
How to create user defined designations is described in the
"
Designations
"
chapter.
